HOPE-IIG vs. HOPE-II: Mitsubishi Spare Parts That Need Separate Identification

HOPE-IIG and HOPE-II share some listed identifiers, but that is not a reason to merge their purchasing lists. The useful comparison is component by component: guide hardware, door-drive equipment, feedback devices and weighing parts. Record the installed configuration before requesting a replacement.

Shared guide references still need dimensional checks

YA029C826G01 counterweight guide blocks appear under both series. That shared number is a good starting point for an inquiry, but the surrounding guide assembly and rail dimensions still matter. Confirm whether the request covers the block, a lining, or the complete guide shoe.

HOPE-IIG also lists pressure rollers including YA034D315G01 and Y414172G01. Preserve the full number and record the eccentric or fixing arrangement visible on the installed part. Do not transfer a roller specification from another elevator merely because both units are HOPE models.

Counterweight guide-shoe option

Compare the original counterweight guide, rail dimensions and retaining arrangement. The broad product title is not a confirmed series-specific match.

View product details ↗

Door motors and belts should be identified together

The HOPE-IIG references include YX401C317-01 door motor, ZTBD002 door belt, and Z1H01-02 / Z1H01-03 belt entries. A motor number does not automatically select the belt. Capture the installed drive arrangement and each part's own markings.

For a belt inquiry, supply its marking, tooth profile, width and length. For a motor, include the nameplate, connector and mounting photographs. Keep a diagnosed motor fault separate from visible belt wear so the quotation covers the correct replacement scope.

Z65AC-018 is a specific HOPE-IIG encoder option

HOPE-IIG lists X65AC-20, X65AC-10 and Z65AC-018 as separate encoder references. HOPE-II lists X65AC-20 and X65AC-10 in the material used here. Treat the additional Z65AC-018 entry as a configuration distinction, not an upgrade instruction.

FELEVATOR's Z65AC-018 product page is relevant when that exact model is confirmed on the installed part. Send the original label, connector, mounting arrangement and system requirements. A matching number starts the compatibility check; it does not replace it.

Z65AC-018 traction encoder

For a confirmed Z65AC-018 requirement. Check the original connector, mounting and system specification.

View product details ↗

Weighing and landing-call power boards are different circuits

P122703B000G01 is identified as a weighing board. The HOPE-IIG list separately includes P366705B000G03 and P366705B000G04 landing-call power boards. Keep these functions and suffixes distinct; a general “HOPE board” description cannot identify the required circuit.

Send board photographs with legible numbers and the technician's diagnosis. Retain hardware revision and configuration details in the request. For mechanical parts, keep measurements beside the part reference rather than using a board or motor number as the assembly identifier.

Frequently asked questions

Can I combine HOPE-II and HOPE-IIG stock by series name?

Group stock only after matching complete identifiers and installed requirements. Similar series names are not evidence of interchangeability.

Does the Z65AC-018 listing cover every HOPE-IIG encoder?

No. The list contains several encoder models. Select from the original component marking and confirmed system requirements.