Mitsubishi ELENESSA Spare Parts: Door Wear, Guide Linings and Electrical Components

An ELENESSA parts inquiry becomes much clearer when door wear, guide wear and electrical faults are separated. A noisy door does not identify a failed control board. Start with the affected assembly, then record the complete marking on the part that inspection has identified.

Door rollers and guide linings: order by the installed geometry

YA057C837G01 is a door hanger roller; YA073D255G01 is an upper pressure roller. Record wheel diameter, width, bearing arrangement and fixing details separately. Similar-looking rollers can occupy different positions and should not be combined into one generic “ELENESSA wheel” order.

The guide-lining references YA047C168-02 and YA218C912-01 also need separate profiles and measurements. Ask whether the requirement is a lining or the complete guide shoe. Keep rail dimensions and photographs of the retaining arrangement with the original part number.

X54HA-01 and YX100C378-02 perform different electrical roles

X54HA-01 is listed as a DC current transformer, while YX100C378-02 is a transformer reference. Do not choose between them by shape. Confirm the diagnosed circuit, original markings, electrical ratings, terminal arrangement and mounting dimensions before asking for a replacement.

FELEVATOR lists both references in the product options below. The current-transformer page groups several identifiers, so state X54HA-01 explicitly in your inquiry. A grouped product title does not establish that every variant on the page has the same specification.

Current-transformer product options

Specify X54HA-01 or YX302C481-01 and its ratings. Confirm the precise variant; a grouped title does not cover every suffix.

View product details ↗

YX100C378-02 AC transformer

Check the original label, electrical ratings, connections and mounting before ordering.

View product details ↗

Encoder and control-board inquiries need their own identification

The ELENESSA list includes encoder X65AC-31. Keep that marking distinct from X65AC-33 or Z65AC references found in other configurations. A feedback complaint needs diagnosis and connection checks before a purchasing decision; a series name alone cannot select the encoder.

For a confirmed controller-board requirement, FELEVATOR also lists KCD-1161C with ELENESSA in its product title. Send the installed board number, revision and connector photographs. This is a separate control-board inquiry, not a replacement suggestion for an encoder or transformer.

KCD-1161C ELENESSA P1 board

For an identified control-board requirement. Confirm the installed board number, revision, connectors and configuration.

View product details ↗

Build a useful ELENESSA stock list

Separate wear-based stock from diagnosis-based purchases. Track rollers, belts and linings by their actual geometry and maintenance findings. For transformers, power components and boards, record confirmed versions and lead times rather than purchasing one “universal” part for every ELENESSA installation.

Include the elevator identification, original component label, front and rear photographs, measured dimensions and quantity in one request. For a board or electrical part, add the technician's confirmed diagnosis and configuration information so the quotation addresses the actual requirement.

Frequently asked questions

Can I order a roller using the ELENESSA name alone?

Use the full component number and dimensions. The series includes different door rollers and guide components with different mounting requirements.

Does a noisy door mean I need KCD-1161C?

No. A control-board purchase requires a confirmed board requirement. Mechanical wear and electrical faults need separate inspection findings.