News Categories

Landing Station Bus 1. Preparation of the station bus 1.1 There are two types of station bus systems: ① BIO Bus: Used in KA, KS, and PI elevators to connect the following devices: - FIGS LIP and LOP - Third-party peripheral interfaces LCUM and LCUX -...

1. Learning to run 1.1 Start the learning process ► HMI: Freeze NodeTree HMI: Commands → FreezeNodeTree → OK. ► Ensure: – Installers remain in front of the control cabinet. – The car must be between the top and bottom hall sta...

WarningThe ETSL protection function is for elevators with short buffer distances.Operating elevators with short buffer distances without this protection function may result in elevator damage, personal injury, or even death.Ensure that the installed AC GSI m...

1. Door Motor V15/V35 1.1. DO V15/V35, without linked landing doors. 1 INSP button (Inspection) 2 INSP LED 3 SETUP LED 4 COM LED (CAN communication) 5 ...

1. Inverter DC circuit inspection The DC circuit test checks the voltage and functionality of the following components: SGRW, SH, input rectifier, braking chopper, braking resistor, and capacitor bank. ► AS.ESE panel: Set the following switches to the fo...

1. Control cabinet The control cabinet comes in three models optimized for different elevator system layouts. 1.1. Machine room-less control cabinet The machine-roomless control cabinet is installed next to the door frame. It includes the machine-roomle...

1. Fan Test► Check the operation of the motor and inverter fans:– Log in to SMLCD.– Scroll to TESTS → VF TESTS → FAN TEST → OK → OK. – Now, the fan on the inverter and the fan on the motor (if present) will be running...

1. Login► Log in to SMLCD.► Read the operating counter (ZQF) from the menu Statistics → Car Trips.► Alternatively, use iSPECI to read the operating counter information.Full access to all menu items requires logging in with a password.The character...

1. User Interface 1.1 HMI User Interface Button Function ESC Exit the current menu / navigate to the previous menu (without saving any content). UP/DOWN Move within the menu (modify the menu) to change its value. OK Confirm...

1. Basic Main Interface Board - SMIC5R.Q ① Main interface controller board ② LED LED Normal Display Explanation LUEISK OFF ON = Safety circuit power OFF (Red LED on DUEISK-A) (Reasons: Safety circuit start voltage > 55V or