Umhlahlandlela ophelele we-Shanghai Mitsubishi Elevator Electrical Board Izilungiselelo
Okuqukethwe
1. Izilungiselelo zeKhabhinethi Yokulawula (Into 203).
1.1 Ukumiswa Kwebhodi Le-P1 (Amamodeli: P203758B000/P203768B000)
1.1 Ukucushwa Kwemodi Yokusebenza
| Isimo somsebenzi | MON0 | I-MON1 | I-SET0 | I-SET1 |
|---|---|---|---|---|
| Ukusebenza Okuvamile | 8 | 0 | 8 | 0 |
| Susa iphutha/Isevisi | Landela imanuwali yokususa iphutha |
1.2 Ukucushwa Kokuxhumana (Imithetho Ye-Jumper)
| Uhlobo lwe-Elevator | I-GCTL | I-GCTH | I-ELE.NO (I-Group Control) |
|---|---|---|---|
| I-Elevator Eyodwa | Hhayi ukweqa | Hhayi ukweqa | - |
| Ukuhambisana/Iqembu | ● (Ugxumile) | ● (Ugxumile) | 1~4 (kumakheshi #F~#I) |
2. Izilungiselelo zesiteshi esiphezulu semoto (Into 231).
2.1 Ibhodi Lokulawula Umnyango (Imodeli: P231709B000)
2.2 Izilungiselelo eziyisisekelo ze-Jumper
| Umsebenzi | I-Jumper | Umthetho Wokumisa |
|---|---|---|
| Isiginali ye-OLT Khubaza | I-JOLT | I-Jumper uma kuphela i-CLT/OLT efakiwe |
| Umnyango Wangaphambili/wasemuva | I-FRDR | I-Jumper yeminyango yangemuva |
| Ukukhetha Uhlobo Lwezimoto | ESIKHATHINI | I-Jumper yama-asynchronous motors (IM) |
2.3 Ukuqondisa Kwezimoto namapharamitha
| NgeMoto Model | Uhlobo Lwezimoto | I-FB Jumper |
|---|---|---|
| I-LV1-2SR/LV2-2SR | Asynchronous | ● |
| I-LV1-2SL | Kuyavumelaniswa | ● |
2.4 SP01-03 Imisebenzi Ye-Jumper
| Iqembu le-Jumper | Umsebenzi | Umthetho Wokumisa |
|---|---|---|
| SP01-0,1 | Imodi yokulawula | Setha imodeli yemoto yomnyango ngamunye |
| SP01-2,3 | Ukuzwela kwe-DLD | ●● (Okuvamile) / ●○ (Phansi) |
| SP01-4,5 | Usayizi we-JJ | Landela amapharamitha enkontileka |
| I-SP02-6 | Uhlobo Lwezimoto (PM kuphela) | Jumper uma TYP=0 |
2.5 Izilungiselelo ze-Jumper ze-JP1~JP5
| I-JP1 | JP2 | JP3 | I-JP4 | JP5 | |
| 1D1G | 1-2 | 1-2 | X | X | 1-2 |
| 1D2G/2D2G | X | X | 2-3 | 2-3 | 1-2 |
Qaphela: “1-2” kusho izikhonkwane ze-jumper ezihambisanayo 1 no-2; “2-3” isho amaphinikhodi okugxuma ahambisanayo 2 no-3
3. I-Car Operating Panel (Into 235) Izilungiselelo
3.1 Ibhodi Lenkinobho (Imodeli: P235711B000)
3.2 Ukucushwa Kwesakhiwo Senkinobho
| Uhlobo Lwesakhiwo | Inkinobho yokubala | RSW0 Ukusetha | RSW1 Ukusetha |
|---|---|---|---|
| Iqondile | 2-16 | 2-F | 0-1 |
| 17-32 | 1-0 | 1-2 | |
| Evundlile | 2-32 | 0-F | 0 |
3.3 Ukulungiswa Kwe-Jumper (J7/J11)
| Uhlobo Lwephaneli | J7.1 | J7.2 | J7.4 | J11.1 | J11.2 | J11.4 |
|---|---|---|---|---|---|---|
| Iphaneli Eyinhloko Yangaphambili | ● | ● | - | ● | ● | - |
| Iphaneli Eyinhloko yangemuva | ● | - | ● | ● | - | ● |
4. Izilungiselelo Zesiteshi Sokwehla (Into 280).
4.1 Ibhodi Lendawo (Imodeli: P280704B000)
4.2 Izilungiselelo Ze-Jumper
| Isikhundla saphansi | TERH | I-TERL |
|---|---|---|
| Isitezi Esingezansi (Asikho Isibonisi) | ● | ● |
| Izitezi eziPhakathi/Phezulu | - | - |
4.3 Ukufakwa Kwekhodi Kwenkinobho Yaphansi (SW1/SW2)
| Inombolo Yenkinobho | SW1 | SW2 | Inombolo Yenkinobho | SW1 | SW2 |
|---|---|---|---|---|---|
| 1-16 | 1-F | 0 | 33-48 | 1-F | 0-2 |
| 17-32 | 1-F | 1 | 49-64 | 1-F | 1-2 |
5. Izilungiselelo Zokushaya ucingo (Into 366).
5.1 Ibhodi Yezingcingo Yangaphandle (Amamodeli: P366714B000/P366718B000)
5.2 Imithetho Ye-Jumper
| Umsebenzi | I-Jumper | Umthetho Wokumisa |
|---|---|---|
| AmaComms aphansi | ISEXWAYISO/CAN | Ihlale igxuma |
| Ukusethwa kwaphansi | SET/J3 | Gxuma okwesikhashana phakathi nokusetha |
| Ukucushwa komnyango wangemuva | J2 | I-Jumper yeminyango yangemuva |
6. Amanothi Abalulekile
6.1 Izinkombandlela Zokusebenza
-
Ukuphepha kuqala: Njalo nqamula amandla ngaphambi kokulungiswa kwe-jumper. Sebenzisa amathuluzi afakwe i-CAT III 1000V.
-
Ukulawula Inguqulo: Qinisekisa kabusha izilungiselelo ngemva kokuthuthukiswa kwesistimu usebenzisa imanuwali yakamuva (August 2023).
-
Ukuxazulula inkinga: Kumakhodi ephutha "F1" noma "E2", beka phambili ukuhlola ama-jumpers axegayo axegayo noma angalungiswanga kahle.
6.2 Isiphakamiso Sedatha Ehlelekile
Ukusekela kwezobuchwepheshe: Vakashelawww.felevator.comukuze uthole izibuyekezo noma uxhumane nonjiniyela abaqinisekisiwe.
Amanothi Emifanekiso:
-
Ibhodi leKhabhinethi Yokulawula P1: Gqamisa izindawo ze-GCTL/GCTH, izindawo ze-ELE.NO, kanye namaswishi ajikelezayo e-MON/SET.
-
Door Control SP Jumpers: Ukuzwela kwekhodi yombala kanye nezindawo zohlobo lwemoto.
-
Ibhodi Lenkinobho Yemoto: Lebula ngokucacile ama-jumper e-J7/J11 nezindlela zesakhiwo sezinkinobho.
-
Ibhodi lokufika: Izikhundla ze-TERH/TERL kanye nombhalo wekhodi waphansi we-SW1/SW2.
-
Ibhodi Lokubamba ucingo: Ama-jumper okuxhumana e-CANH/CANL nezindawo zokusetha phansi.