Lifator Amashanyarazi Yumuzenguruko Ukemura ibibazo - Inzira nyamukuru (MC)

1 Incamake

Inzira ya MC igizwe n'ibice bitatu:igice cyinjiza,igice nyamukuru cyumuzunguruko, naIgice gisohoka.

Igice cyinjiza

• Bitangirira kumashanyarazi yinjiza.

• BinyuraIbigize EMC(muyunguruzi, reaction).

• Ihuza na inverter module ikoresheje igenzura# 5(cyangwa ikosora module muri sisitemu yo kuvugurura ingufu).

Igice Cyumuzingi

• Ibice byingenzi birimo:

  • Ikosora: Hindura AC kuri DC.

    • Ikosora ridakurikiranwa: Koresha ibiraro bya diode (nta cyiciro gikurikirana gisabwa).

    • Igenzura: Koresha moderi ya IGBT / IPM hamwe no kugenzura ibyiciro.

  • DC Ihuza:

    • Imashanyarazi ya electrolytike (ikurikirana-ihuza sisitemu 380V).

    • Umuvuduko uringaniye.

    • BihitamoKurwanya ubuzima bushya(kuri sisitemu idasubirwaho kugirango ikwirakwize ingufu zirenze).

  • Inverter: Hindura DC gusubira muri variable-frequency AC kuri moteri.

    • Ibyiciro bisohoka (U, V, W) binyura muri DC-CTs kubitekerezo byubu.

Igice gisohoka

• Itangirira kuri inverter isohoka.

• Binyura muri DC-CTs nibice bya EMC (reaction).

• Ihuza na moteri ya moteri.

Ingingo z'ingenzi:

• Ubuharike: Menya neza "P" (positif) na "N" (mbi) ihuza ubushobozi.

• SNUBBER Inzira: Yashyizwe kuri moderi ya IGBT / IPM kugirango uhagarike umuvuduko wa voltage mugihe cyo guhinduranya.

• Kugenzura Ibimenyetso: Ibimenyetso bya PWM byanyujijwe mu nsinga zigoretse kugirango bigabanye kwivanga.

Igishushanyo 1-1: Igenzura ridakurikiranwa Inzira nyamukuru

2 Intambwe rusange yo gukemura ibibazo

2.1 Amahame ya MC Yumuzenguruko Wibeshya

1. Kugenzura ibimenyetso:

   • Kugenzura ibyiciro uko ari bitatu bifite ibipimo byamashanyarazi bisa (resistance, inductance, capacitance).

   • Uburinganire ubwo aribwo bwose bwerekana amakosa (urugero, diode yangiritse mugukosora).

2. Icyiciro gikurikirana:

   • Kurikiza igishushanyo mbonera.

   • Menya neza ko sisitemu yo kugenzura icyiciro ihuza ibizunguruka.

2.2 Gufungura Igenzura rifunze

Gutandukanya amakosa muri sisitemu ifunze-loop:

1. Guhagarika moteri ikurura:

   • Niba sisitemu ikora mubisanzwe idafite moteri, ikosa riri muri moteri cyangwa insinga.

   • Niba atari byo, wibande kuri guverinoma ishinzwe kugenzura (inverter / rectifier).

2. Kurikirana ibikorwa byabakozi:

   • Kuri sisitemu nshya:

     • Niba# 5(kwinjiza umuhuza) ingendo mbere#LB(umuhuza wa feri) arakora, reba ikosora.

     • Niba#LBikora ariko ibibazo bikomeje, reba inverter.

2.3 Isesengura ry'amakosa

• P1 Kode y'Ubuyobozi:

  • E.g.,E02(birenze urugero),E5(DC ihuza birenze urugero).

  • Kuraho amakosa yamateka nyuma ya buri kizamini kugirango usuzume neza.

• Kode ya sisitemu yo kuvugurura:

  • Reba icyiciro gihuza hagati ya grid voltage niyinjiza ryubu.

2.4 (M) Amakosa yuburyo bwa kera

• Ibimenyetso: Guhagarara gitunguranye mugihe gikoreshwa na bateri.

• Impamvu:

  • Umutwaro utari wo gupima amakuru.

  • Gutandukanya umuvuduko uhungabanya ingufu za voltage.

• Reba:

  • Kugenzura ibikorwa byabahuza nibisohoka voltage.

  • Kurikirana kode yubuyobozi P1 mbere (M) ELD ihagarikwa.

2.5 Gukurura Ikosa rya moteri

3 Amakosa Rusange & Ibisubizo

3.1 Icyerekezo cya PWFH (PP) Kuzimya cyangwa Kumurika

• Impamvu:

  1. Gutakaza icyiciro cyangwa urukurikirane rutari rwo.

  2. Ikibaho cyo kugenzura nabi (M1, E1, cyangwa P1).

• Ibisubizo:

  • Gupima ibyinjira byinjira kandi bikosore icyiciro.

  • Simbuza ikibaho gifite inenge.

3.2 Kunanirwa Kwiga Kumashanyarazi

• Impamvu:

  1. Encoder idahuye (koresha ibimenyetso byerekana ibimenyetso kugirango urebe neza).

  2. Insinga zangiritse.

  3. Kode ya kode cyangwa ikibaho cya P1.

  4. Igenamiterere ritari ryo (urugero, ibinyabiziga bikurura moteri).

• Ibisubizo:

  • Ongera ushyireho kodegisi, usimbuze insinga / imbaho, cyangwa uhindure ibipimo.

3.3 Amakosa kenshi E02 (Birenze urugero)

• Impamvu:

  1. Gukonjesha nabi module (abafana bafunze, paste yumuriro utaringaniye).

  2. Gufata nabi feri (icyuho: 0.2–0.5mm).

  3. Ikibaho cya E1 cyangwa module ya IGBT.

  4. Imashini ihinduranya moteri ngufi.

  5. Impinduka zubu.

• Ibisubizo:

  • Sukura abafana, ongera ushyireho paste yumuriro, uhindure feri, cyangwa usimbuze ibice.

3.4 Amakosa rusange

• Impamvu:

  1. Porogaramu idahuye.

  2. Kurekura feri idasanzwe.

  3. Kunanirwa na moteri.

• Ibisubizo:

  • Kuvugurura software, guhuza feri, cyangwa gusimbuza moteri.

Inyandiko Inyandiko:
Aka gatabo gahuza na tekinike ya tekinike ya Mitsubishi. Buri gihe ukurikize protocole yumutekano kandi urebe imfashanyigisho zemewe kubisobanuro byihariye.

© Kuzamura ibikoresho bya tekiniki