Phau Ntawv Qhia Txog Shanghai Mitsubishi Of Elevator Hluav Taws Xob Board Chaw
Cov Lus Qhia
1. Tswj txee (khoom 203) Chaw
1.1 P1 Board Configuration (Models: P203758B000 / P203768B000)
1.1 Operating Mode Configuration
| Function State | MON 0 | MON 1 | SET 0 | SET 1 |
|---|---|---|---|---|
| Kev ua haujlwm li qub | 8 | 0 | 8 | 0 |
| Debug/Kev Pabcuam | Ua raws li phau ntawv qhia debugging |
1.2 Kev Sib Txuas Lus Configuration (Jumper Rules)
| Hom of elevator | GCTL | GCTH | ELE.NO (Group Control) |
|---|---|---|---|
| Ib leeg of elevator | Tsis jumpered | Tsis jumpered | - |
| Parallel/Pob | ● (Jumpered) | ● (Jumpered) | 1 ~ 4 (rau #F ~ #I elevator) |
2. Chaw Nres Tsheb Sab saum toj (khoom 231) Chaw
2.1 Qhov Rooj Tswjhwm Saib Xyuas (Model: P231709B000)
2.2 Basic Jumper Settings
| Muaj nuj nqi | Jumper | Txoj cai Configuration |
|---|---|---|
| OLT Signal Disable | JOLT | Jumper yog tias tsuas yog CLT / OLT raug teeb tsa |
| Pem hauv ntej/Rear Qhov Rooj | FRDR | Jumper rau rear qhov rooj |
| Kev xaiv lub cev muaj zog | IN THE | Jumper rau asynchronous motors (IM) |
2.3 Kev taw qhia lub cev muaj zog & Parameters
| Los ntawm Motor Model | Hom Tsav | FB Jumper |
|---|---|---|
| LV1-2SR/LV2-2SR | Asynchronous | ● |
| LV1-2SL | Synchronous | ● |
2.4 SP01-03 Jumper Functions
| Jumper Group | Muaj nuj nqi | Txoj cai Configuration |
|---|---|---|
| SP01-0, 1 | Tswj hom | Teem ib lub qhov rooj motor qauv |
| SP01-2, 3 | DLD Sensitivity | ●● (Standard) / ●○ (Tsawg) |
| SP01-4,5 | JJ Size | Ua raws li cov lus cog tseg |
| SP02-6 | Lub cev muaj zog (PM nkaus xwb) | Jumper yog TYP=0 |
2.5 Jumper nqis rau JP1 ~ JP5
| JP1 | JP 2 | JP3 | JP4 | JP 5 | |
| 1D1G | 1-2 | 1-2 | X | X | 1-2 |
| 1D2G/2D2G | X | X | 2-3 | 2-3 | 1-2 |
Lus Cim: "1-2" txhais tau hais tias cov jumper sib thooj 1 thiab 2; "2-3" txhais tau hais tias sib txuas jumper pins 2 thiab 3
3. Lub Rooj Tswjhwm Saib Xyuas Tsheb (khoom 235) Chaw
3.1 Khawm Board (Model: P235711B000)
3.2 Khawm Layout Configuration
| Hom txheej txheem | Khawm suav | RSW0 Kev | RSW1 Kev |
|---|---|---|---|
| Ntsug | 2-16 | 2-F | 0-1 |
| 17-32 : kuv | 1-0 | 1-2 | |
| Kab rov tav | 2-32 | 0-F | 0 |
3.3 Jumper Configurations (J7/J11)
| Hom vaj huam sib luag | J 7.1 | J 7.2 | j 7.4 | J11.1 | J11.2 | J11.4 |
|---|---|---|---|---|---|---|
| Pem hauv ntej Main Vaj Huam Sib Luag | ● | ● | - | ● | ● | - |
| Tsheb Main Vaj Huam Sib Luag | ● | - | ● | ● | - | ● |
4. Chaw nres tsheb tsaws (khoom 280) Chaw
4.1 Landing Board (Model: P280704B000)
4.2 Jumper Settings
| Pem teb txoj hauj lwm | TERH | TERL |
|---|---|---|
| Hauv qab pem teb (tsis muaj zaub) | ● | ● |
| Nruab nrab / Sab saum toj Pem Teb | - | - |
4.3 Pem Teb Khawm Encoding (SW1/SW2)
| Khawm Number | SW1 | SW 2 | Khawm Number | SW1 | SW 2 |
|---|---|---|---|---|---|
| 1-16 | 1-F | 0 | 33-48 : kuv | 1-F | 0-2 |
| 17-32 : kuv | 1-F | 1 | 49-64 : kuv | 1-F | 1-2 |
5. Xauv Xauv (khoom 366) Chaw
5.1 Sab Nraud Hu Pawg (Cov Qauv: P366714B000 / P366718B000)
5.2 Jumper Txoj Cai
| Muaj nuj nqi | Jumper | Txoj cai Configuration |
|---|---|---|
| Hauv qab Comms | CEEB TOOM/CAN | Ib txwm dhia |
| Pem teb teeb | SET/J3 | Jumper ib ntus thaum teeb tsa |
| Tsheb Qhov Rooj Config | J2 | Jumper rau rear qhov rooj |
6. Cov Lus Cim Tseem Ceeb
6.1 Cov Txheej Txheem Ua Haujlwm
-
Kev nyab xeeb ua ntej: Txhua zaus disconnect fais fab ua ntej jumper hloov. Siv cov cuab yeej CAT III 1000V insulated.
-
Version Control: Rov qab siv cov chaw tom qab hloov kho qhov system siv phau ntawv tshiab kawg (Lub Yim Hli 2023).
-
Kev daws teeb meem: Rau cov lej yuam kev "F1" lossis "E2", ua ntej kuaj xyuas cov xoob xoob lossis yuam kev jumpers.
6.2 Structured Data suggestion
Kev pab txhawb nqa: Mus saibwww.feelevator.comrau kev hloov tshiab lossis hu rau cov kws tshaj lij uas tau lees paub.
Cov Lus Cim:
-
Tswj txee P1 Board: Highlight GCTL/GCTH txoj hauj lwm, ELE.NO zones, thiab MON/SET rotary keyboards.
-
Qhov Rooj Tswj SP Jumpers: Xim-code rhiab heev thiab lub cev muaj zog hom aav.
-
Tsheb Khawm Board: Kom meej meej sau J7 / J11 jumpers thiab khawm layout hom.
-
Landing Board: TERH/TERL txoj hauj lwm thiab SW1/SW2 pem teb encoding.
-
Landing Call Board: CANH/CANL kev sib txuas lus jumpers thiab pem teb teeb chaw.