I-Mitsubishi Elevator Safety Circuit (SF) IsiKhokelo sokuSombulula ingxaki

ISekethe yoKhuseleko (SF)

4.1 Isishwankathelo

IISekethe yoKhuseleko (SF)iqinisekisa ukuba zonke izixhobo zokhuseleko zoomatshini nezombane ziyasebenza. Ithintela ukusebenza kwe-elevator ukuba nayiphi na imeko yokhuseleko yaphulwa (umzekelo, iingcango ezivulekileyo, i-overspeed).

Amacandelo Angundoqo

1. Ikhonkco loKhuseleko (#29):

   • Iiswitshi zokhuseleko eziqhagamshelwe ngothotho (umzekelo, ukutshintshela umngxuma, irhuluneli, ukumisa kaxakeka).

   • Ugqithiso lokhuseleko lwamandla#89(okanye ingqiqo yangaphakathi kwiibhodi ze-C-language P1).

2. ISekethe yokutshixa ucango (#41DG):

   • Iingcango zecango ezidityanisiweyo zochungechunge (imoto + iingcango zokumisa).

   • Ixhaswa ngu#78(imveliso evela kwikhonkco lokhuseleko).

3. UJongo loKhuseleko lweNdawo yomnyango:

   • Ngokunxuseneyo nezitshixo zeminyango. Isebenza kuphela xa iingcango zivuliwe kwindawo yokumisa.

Imisebenzi ebalulekileyo:

• Unqumla amandla ukuze#5 (umqhagamshelwa ophambili)kwaye#LB (isiqhoboshi sebrake)ukuba iyaqhutywa.

• Ibekwe esweni nge-LEDs kwibhodi ye-P1 (#29, #41DG, #89).

4.2 Amanyathelo okusombulula iingxaki ngokubanzi

4.2.1 Ukuchongwa kweempazamo

Iimpawu:

• #29/#89 LED icimile→ Ikhonkco lokhuseleko liphazamisekile.

• Ukumisa ngokungxamisekileyo→ Isekethi yokhuseleko ivuselelwe ngexesha lokusebenza.

• Akukho qaliso→ Isekethi yokhuseleko ivula xa uphumle.

Iindlela zokuxilonga:

1. Izalathisi ze-LED:

   • Jonga ii-LED zebhodi ze-P1 (#29, #41DG) kwiisekethe ezivulekileyo.

2. Iikhowudi zeempazamo:

   • Umzekelo, "E10" yokuphazamiseka kwekhonkco lokhuseleko (kwiziphoso ezidlulayo).

4.2.2 Iimpazamo zasekuhlaleni

1. ISekethe eZinzileyo eVulekileyo:

   • Sebenzisauvavanyo olusekwe kwindawo: Ukulinganisa amandla ombane kwiindawo zokuhlangana (umzekelo, umngxuma, igumbi lomatshini).

   • Umzekelo: Ukuba amandla ombane ehla phakathi kwe-junction J10-J11, hlola iiswitshi kuloo ndawo.

2. IsiThuba esiVulekileyo seSekethe:

   • Tshintsha iiswitshi ezirhanelwayo (umzekelo, iswitshi yomngxuma egugileyo).

   • Uvavanyo lokugqitha: Sebenzisa iingcingo ezisecaleni ukudibanisa ngokugqithisileyo amacandelo entambo (ngaphandle kokutshintsha).

ISILUMKISO: Ungaze utshintshe ukhuseleko lwesekethe emfutshane kuvavanyo.

4.2.3 Iimpazamo zoKhuseleko lweNdawo yomnyango

Iimpawu:

• Ukuyeka ngokukhawuleza ngexesha lokulinganisa kwakhona.

• Iikhowudi eziphosakeleyo ezinxulumene neempawu zomnyango womnyango (RLU / RLD).

Oonobangela:

1. IiSensors zoMmandla weNcango ezingalungelelanisiweyo (PAD):

   • Lungisa isithuba phakathi kwe-PAD kunye ne-magnetic vane (ngokuqhelekileyo yi-5-10mm).

2. Ii-Faulty Relay:

   • Uvavanyo lokuvavanya (DZ1, DZ2, RZDO) kwiibhodi zokukhusela.

3. Imiba yeeNcingo zoMqondiso:

   • Khangela iingcingo ezaphukileyo/ezikhuselweyo kufutshane neenjini okanye iintambo ezinombane ophezulu.

4.3 Iimpazamo eziqhelekileyo kunye nezisombululo

4.3.1 #29 I-LED Cima (Vula Ikhonkco loKhuseleko)

4.3.2 #41DG LED Cima (Isitshixo socango sivuliwe)

4.3.3 Ukumisa ngokuNgxamisekileyo + Izibane zeQhosha ziKhanyisiwe

4.3.4 Ukumisa ngokuNgxamisekileyo + Izibane zeQhosha zicinyiwe

5. Imizobo

Umzobo 4-1: ISchematic yeSekethe yoKhuseleko

Umzobo 4-2: Isekethe yoKhuseleko lweNdawo yomnyango

Amanqaku oxwebhu:
Esi sikhokelo sihambelana nemigangatho ye-elevator ye-Mitsubishi. Soloko uvala amandla phambi kokuba uvavanye kwaye ujonge imodeli ethile yeencwadana.

© Amaxwebhu oBugcisa oLondolozo lwe-elevator