Isikhokelo esiBanzi kwi-Shanghai Mitsubishi Elevator yoMbane kwiSeto zeBhodi yoMbane
Isiqulatho
1. Ulawulo lweKhabhinethi (Inqaku 203) Izicwangciso
1.1 Ulungelelwaniso lweBhodi yeP1 (IiModeli: P203758B000/P203768B000)
1.1 Ulungelelwaniso lweNdlela yokuSebenza
| Ilizwe lomsebenzi | MON0 | MON1 | SET0 | SET1 |
|---|---|---|---|---|
| Ukusebenza okuqhelekileyo | 8 | 0 | 8 | 0 |
| Debug/Inkonzo | Landela incwadi yokulungisa ingxaki |
1.2 Ulungelelwaniso loNxibelelwano (iMithetho yeJumper)
| Uhlobo lwe-Elevator | GCTL | GCTH | ELE.NO (Ulawulo lweQela) |
|---|---|---|---|
| I-Elevator enye | Hayi watsiba | Hayi watsiba | - |
| Ngokunxuseneyo/Iqela | ● (Uxhume) | ● (Uxhume) | 1~4 (ye #F~#I izinyusi) |
2. ISikhululo esiPhezulu seMoto (Inqaku le-231) Izicwangciso
2.1 Ibhodi yokulawula umnyango (Umzekelo: P231709B000)
2.2 Iisetingi zeJumper ezisisiseko
| Umsebenzi | Umtsi | Umgaqo woqwalaselo |
|---|---|---|
| Isiginali ye-OLT Khubaza | JOLT | Umtsi ukuba kuphela iCLT/OLT efakiweyo |
| Ngaphambili/ngasemva komnyango | FRDR | Umtsi kwiingcango ezingasemva |
| UkuKhethwa koHlobo lweMoto | KWI | Umtsi weenjini ezilinganayo (IM) |
2.3 Ulwalathiso lweMoto kunye neeParamitha
| NgeModeli yeMoto | Uhlobo lweMoto | FB Jumper |
|---|---|---|
| I-LV1-2SR/LV2-2SR | Asynchronous | ● |
| I-LV1-2SL | Ungqamaniso | ● |
2.4 SP01-03 Imisebenzi yeJumper
| Iqela leJumper | Umsebenzi | Umgaqo woqwalaselo |
|---|---|---|
| SP01-0,1 | Imo Yokulawula | Seta ngocango ngalunye imodeli yemoto |
| SP01-2,3 | Uvakalelo lwe-DLD | ●● (Esemgangathweni) / ●○ (Phantsi) |
| SP01-4,5 | Ubungakanani beJJ | Landela iiparamitha zekhontrakthi |
| SP02-6 | Uhlobo lweMoto (PM kuphela) | Umtsi ukuba TYP=0 |
2.5 Iisetingi zeJumper zeJP1~JP5
| JP1 | JP2 | JP3 | JP4 | JP5 | |
| 1D1G | 1-2 | 1-2 | X | X | 1-2 |
| 1D2G/2D2G | X | X | 2-3 | 2-3 | 1-2 |
Qaphela: “1-2” ithetha izikhonkwane zokutsiba ezihambelanayo 1 no-2; "2-3" ithetha i-jumper pins ehambelanayo 2 kunye no-3
3. Iphaneli yokuSebenza kweMoto (Inqaku 235) Izicwangciso
3.1 Ibhodi yeqhosha (Umzekelo: P235711B000)
3.2 Ulungelelwaniso loYilo lweQhosha
| Uhlobo lobeko | Bala iqhosha | RSW0 Ukumisela | RSW1 Setting |
|---|---|---|---|
| Ngokuthe nkqo | 2-16 | 2-F | 0-1 |
| 17-32 | 1-0 | 1-2 | |
| Ukuthe tye | 2-32 | 0-F | 0 |
3.3 Ulungelelwaniso lweJumper (J7/J11)
| Uhlobo lwePhaneli | J7.1 | J7.2 | J7.4 | J11.1 | J11.2 | J11.4 |
|---|---|---|---|---|---|---|
| Iphaneli ePhambili ePhambili | ● | ● | - | ● | ● | - |
| Iphaneli ePhambili yangasemva | ● | - | ● | ● | - | ● |
4. Isitishi sokuHlala (Inqaku le-280) Izicwangciso
4.1 Ibhodi yokuHlala (Umzekelo: P280704B000)
4.2 Iisetingi zeJumper
| Isikhundla soMgangatho | TERH | I-TERL |
|---|---|---|
| Umgangatho ongezantsi (Akukho Mboniso) | ● | ● |
| Imigangatho ephakathi/ePhezulu | - | - |
4.3 Ukufakwa kweekhowudi kwiQhosha loMgangatho (SW1/SW2)
| Inombolo yeqhosha | SW1 | SW2 | Inombolo yeqhosha | SW1 | SW2 |
|---|---|---|---|---|---|
| 1-16 | 1-F | 0 | 33-48 | 1-F | 0-2 |
| 17-32 | 1-F | 1 | 49-64 | 1-F | 1-2 |
5. Izicwangciso zokuHlala (Inqaku le-366).
5.1 IBhodi yeeFowuni zaNgaphandle (IiModeli: P366714B000/P366718B000)
5.2 Imithetho yokutsiba
| Umsebenzi | Umtsi | Umgaqo woqwalaselo |
|---|---|---|
| IiComms zoMgangatho ongezantsi | ISILUMKISO/I-CAN | Ngalo lonke ixesha utsiba |
| Ukusekwa koMgangatho | SET/J3 | Umtsi okwexeshana ngexesha lokuseta |
| Uqwalaselo loMcango wangemva | J2 | Umtsi kwiingcango ezingasemva |
6. Amanqaku abalulekileyo
6.1 Izikhokelo zokuSebenza
-
Ukhuseleko kuqala: Soloko ukhulula amandla phambi kohlengahlengiso lwe-jumper. Sebenzisa izixhobo ezigqunyiweyo ze-CAT III 1000V.
-
Ulawulo lwenguqulelo: Hlaziya useto emva kohlaziyo lwenkqubo usebenzisa incwadi yamva nje (yeThupha ngo-2023).
-
Ukulungisa ingxaki: Kwiikhowudi zemposiso "F1" okanye "E2", beka phambili ukukhangela izijumpi ezikhululekileyo okanye ezingalunganga.
6.2 Iingcebiso zeDatha eYakhiweyo
Uxhaso lobuchwepheshe: Ndwendwelawww.felevator.comukuhlaziya okanye uqhagamshelane neenjineli eziqinisekisiweyo.
Imizekeliso amanqaku:
-
Ibhodi yeKhabhinethi yoLawulo yeP1: Gxininisa izithuba zeGCTL/GCTH, iindawo ze-ELE.NO, kunye ne-MON/SET iiswitshi ezijikelezayo.
-
Ukulawula umnyango SP Jumpers: Uvakalelo lwekhowudi yombala kunye nemimandla yohlobo lweemoto.
-
Ibhodi yeqhosha lemoto: Bhala ngokucacileyo i-J7/J11 jumpers kunye neendlela zokubeka amaqhosha.
-
Ibhodi yokuHlala: TERH/TERL izithuba kunye SW1/SW2 encoding umgangatho.
-
Ibhodi yeFowuni yokuHlala: I-CANH / CANL i-jumpers yonxibelelwano kunye neendawo zokumisela umgangatho.