Mitsubishi Elevator Nexay VFGH Elevator Commissioning Manual: Safety & Control Panel Guidelines

1. Mehato ea Bohlokoa ea Tšireletso

1.1 Litlhoko tsa Tšireletso ea Matla

1. Netefatso ea Capacitor Discharge

   • Ka mor'a ho khaola matla a ka sehloohong a lifti, DCV LED holim'a boto ea surge absorber (KCN-100X) e tla tima ka nako ea ~ 10 metsotsoana.

   • Ketso e Bohlokwa:Pele o sebeletsa li-circuits tsa koloi, sebelisa voltmeter ho netefatsa hore motlakase ho li-capacitor tse kholo o haufi le zero.

2. Kotsi ea Sehlopha sa Taolo ea Sehlopha

   • Haeba tsamaiso ea sehlopha e kentsoe, li-terminals tse arolelanoang (li-terminals/likhokahanyo tse tšoailoeng ka bofubelu) li lula li ntse li sebetsa le ha phanele ea taolo ea lifti e le 'ngoe e tima.

1.2 Litaelo tsa Ts'ebetso tsa Phanele ea Taolo

1. Tšireletso ea ESD bakeng sa li-semiconductors

   • Qoba ho ikopanya ka kotloloho le likarolo tsa semiconductor tse hlohlellelitsoeng ho liboto tsa E1 (KCR-101X) kapa F1 (KCR-102X). Ho tsoa ka mokhoa o tsitsitseng ho ka senya li-module tsa IGBT.

2. IGBT Module Replacement Protocol

   • Haeba mojule oa IGBT o hloleha, nka sebakali-module tsohleka har'a yuniti e lumellanang ea rectifier/inverter ho netefatsa bots'epehi ba sistimi.

3. Thibelo ea Ntho ea Kantle ho Naha

   • Thibela ho beha likarolo tsa tšepe tse hlephileng (mohlala, likurufu) holim'a phanele ea taolo ho qoba likotsi tsa nako e khuts'oane.

4. Lithibelo tsa ho Sebelisa Matla

   • Le ka mohla u se ke ua matlafatsa yuniti ea koloi haeba lihokelo leha e le life li sa koaheloe nakong ea ho laela kapa tlhokomelo.

5. Ntlafatso ea Sebaka sa Mosebetsi

   • Likamoreng tse koaletsoeng tsa mochini, ho na le liphanele tse sireletsehileng tsa mahlakoreng / tse ka morao pele ho ts'ebetso ea ho qetela. Litšebeletso tsohle li tlameha ho etsoa ka pele.

6. Mokhoa oa ho fetola parameter

   • SetaR/M-MNT-FWR toggle switchhoBoemo ba MNTpele o fetola liparamente tsa lenaneo la lifti.

2. Netefatso ea Phepelo ea Matla

2.1 Tlhahlobo ea ho laola Voltage

Netefatsa litekanyo tsa ho kenya/tsoang ho pholletsa le litekanyo tse khethiloeng:

Netefatso ea Phepelo ea Matla a Boto ea P1:

• -12V ho ea ho GND: DC-12V (±5%)

• + 12V ho ea ho GND: DC+12V (±5%)

• +5V ho ea ho GND: DC+5V (±5%)

2.2 Tlhahlobo ea Phepelo ea Matla a Koloi le ho Lulisa

Netefatsa motlakase oa AC bakeng sa cabin le litsamaiso tsa ho lulisa:

2.3 Tlhahlobo ea Sehokelo le Sekhahla sa Potoloho

1. Mehato ea Pele ho Matla:

   • KoalaNF-CP,NF-SP, leSCBli-switches.

   • Netefatsa hore lihokelo tsohle li butseP1leR1 libotoli hokeloa ka mokhoa o sireletsehileng.

2. Sequential Power-On Protocol:

   • Ka mor'a ho kenya tšebetsong NF-CP/NF-SP/SCB, matla ON li-breaker tsa tšireletso le li-switches tsa tšireletso tsa potolohongoe ka nako.

   • Bakeng sa li-circuits tsa motlakase tse khethiloeng, netefatsa ho lumellana ha motlakasepeleho koala li-switches:

   Potoloho ea Matla	Tšireletso Switch	Ntlha ea Tekanyo	Motlakase o Tloaelehileng	Mamello
   DC48V	ZCA	Lehlakore la mantlha ↔ Terminal 107	DC48V	± 3V
   DC24V	ZCB	Lehlakore la mantlha ↔ Terminal 107	DC24V	± 2V

3. Tlhokomeliso ea Matla a bekapo:

   • O SE KE oa ama lehlakore la bobeli la mosireletsi oa potoloho ea BTP- matla a bekapo a lula a sebetsa.

3. Tlhahlobo ea Motor Encoder

3.1 Mokhoa oa Teko oa Encoder

1. Ho Ikhetha ka Matla:

   • Koala theSesebelisoa sa matla sa NF-CP.

2. Ho Khaoha ha Encoder:

   • Tlosa sehokelo sa encoder lehlakoreng la mochini o hohelang.

   • Lokolla likurufu tsa ho khoasolla encoder.

3. Netefatso ea Sehokelo sa PD4:

   • Netefatsa khokahano e sireletsehileng eaSesebelisoa sa PD4letlapeng la P1.

4. Tlhahlobo ea Voltage:

   • Bulela NF-CP.

   • Lekanya voltage ho sehokelo sa encoder:

     • Lithakhisa 1 (+) ↔ 2 (–):+12V ±0.6V(mamello e hlokolosi).

5. Reconnection Protocol:

   • Koala NF-CP.

   • Hokela hape sehokelo sa encoder.

6. Tlhophiso ea Parameter:

   • Bulela NF-CP.

   • Beha P1 board rotary potentiometers:

     • MON1 = 8,MON0 = 3.

7. Teko ea Ketsiso ea Tataiso:

   • Fetola sekhouto ho etsisa liftiPHAHAMAtataiso.

   • NetefatsaPontšo ea 7SEG2 e bonts'a "u"(sheba Setšoantšo sa 4).

   • Haeba "d" e hlaha: Fetola lipara tsa lithapo tsa encoder:

     • ENAP ↔ ENBPleENAN ↔ ENBN.

8. Qetello:

   • Tiisa ka mokhoa o sireletsehileng li-encoder screws.

Tlhahlobo ea Boemo ba 4 ea LED

Sheba Setšoantšo sa 1 bakeng sa meralo ea boto.

Licheke Tse Bohlokoa:

1. Netefatso ea Yuniti ea Rectifier:

   • Ka mor'a ho felloa ke matla,CFO ho 7SEG e tlameha ho khantša.

   • Haeba CFO e tima: Hlahloba lithapo tsa motlakase oa potoloho le tatellano ea mekhahlelo.

2. Netefatso ea Boemo ba WDT:

   • Netefatsa khanya ea:

     • CWDTleMWDT(KCD-100X)

     • WDT(KCD-105X)

   • Haeba WDT e tima:

     • Hlahloba+ 5V phepelole botšepehi ba sehokelo.

3. Teko ea Potoloho ea Capacitor Charge:

   • LED ea DCVka boto ea capacitor (KCN-1000/KCN-1010) e tlameha ho:

     • E bonesa ha o butswe.

     • tima~10 metsotsoanaka mor'a ho tima motlakase.

   • Boitšoaro bo sa tloaelehang ba CVD: Hlalosa:

     • Sesebelisoa sa inverter

     • Lipotoloho tsa ho qosa / ho ntša

     • Capacitor terminal voltage

Setšoantšo sa 1 boemo ba LED holim'a boto ea P1