Mitsubishi Elevator Nexway VFGH Elevator Commissioning Manual: Safety & Control Panel Guidelines

1. Muhimman Kariyar Tsaro

1.1 Bukatun Tsaron Wuta

1. Tabbatar da Fitar Capacitor

   • Bayan yanke babban wutar lantarki, LED DCV akan allon ɗaukar nauyi (KCN-100X) zai mutu a cikin ~ 10 seconds.

   • Muhimmin Mataki:Kafin yin hidimar da'irori na tuƙi, yi amfani da voltmeter don tabbatar da ƙarfin lantarki a cikin manyan capacitors yana kusa da sifili.

2. Hazartan Kula da Rukuni

   • Idan an shigar da tsarin kula da rukuni, tashoshin da aka raba (masu jajayen tashoshi/masu haɗawa) suna ci gaba da rayuwa ko da an kashe rukunin kula da lif ɗaya.

1.2 Sharuɗɗan Ayyukan Gudanarwa

1. Kariyar ESD don Semiconductors

   • Guji tuntuɓar kai tsaye tare da abubuwan haɗin semiconductor masu haifar da tushe akan allunan E1 (KCR-101X) ko F1 (KCR-102X). Fitarwa a tsaye na iya lalata kayan aikin IGBT.

2. IGBT Module Protocol

   • Idan tsarin IGBT ya gaza, maye gurbinduk modulesa cikin madaidaicin naúrar gyara/inverter don tabbatar da amincin tsarin.

3. Rigakafin Abubuwan Waje

   • Hana sanya sassan ƙarfe maras tushe (misali, sukurori) akan saman kwamitin sarrafawa don gujewa haɗarin gajerun kewayawa.

4. Ƙuntatawar Ƙarfi

   • Kar a taɓa ƙarfafa naúrar tuƙi idan an cire wasu masu haɗawa yayin ƙaddamarwa ko kulawa.

5. Inganta Wurin Aiki

   • A cikin dakunan na'ura, amintattun sashin kula da gefen baya / na baya kafin shigarwa na ƙarshe. Duk sabis dole ne ya faru daga gaba.

6. Tsarin Gyaran Siga

   • SaitaR/M-MNT-FWR sauyawakuMatsayin MNTkafin musanya sigogi na shirin elevator.

2. Tabbatar da Samar da Wutar Lantarki

2.1 Kula da Wutar Lantarki

Tabbatar da ƙarfin shigarwa/fitarwa a cikin ma'aunin da aka keɓe:

Tabbacin Samar da Wutar Hukumar P1:

• -12V zuwa GND: DC-12V (± 5%)

• +12V zuwa GND: DC+12V (± 5%)

• +5V zuwa GND: DC+5V (± 5%)

2.2 Mota & Saukowa Tabbatar Samar da wutar lantarki

Tabbatar da ƙarfin wutar lantarki na AC don tsarin gida da tsarin saukowa:

2.3 Mai Haɗawa & Binciken Watsawa

1. Matakan Gabatar da kuzari:

   • KasheFarashin NF-CP,NF-SP, kumaSCBmasu sauyawa.

   • Tabbatar da duk masu haɗawa a kunneP1kumaR1 allunaan toshe su cikin aminci.

2. Ƙa'idar Ƙarfin Ƙarfi na Jeri:

   • Bayan kunna NF-CP/NF-SP/SCB, wutar lantarki ON masu kariyar tsaro da maɓallan kariyar kewayawadaya bayan daya.

   • Don zaɓin da'irar wutar lantarki, tabbatar da yarda da wutar lantarkikafinmakullin rufewa:

   Wutar Wuta	Kariya Canja	Wurin Aunawa	Standard Voltage	Hakuri
   DC48V	ZCA	Gefen Farko ↔ Terminal 107	DC48V	± 3V
   DC24V	ZCB	Gefen Farko ↔ Terminal 107	DC24V	± 2V

3. Gargadin Ƙarfin Ajiyayyen:

   • KAR KA taɓa gefen na biyu na mai kariyar kewayawa na BTP– ikon madadin ya kasance yana aiki.

3. Binciken Encoder na Motoci

3.1 Tsarin Gwajin Encoder

1. Ware Wuta:

   • KasheNF-CP wutar lantarki.

2. Cire haɗin encoder:

   • Cire mai haɗa mahaɗin a gefen injin gogayya.

   • Sake ƙwanƙwasa ƙwanƙwasa sukurori.

3. Tabbatar da Mai Haɗin PD4:

   • Tabbatar da amintaccen haɗin kaiFarashin PD4a kan allo P1.

4. Duban wutar lantarki:

   • Kunna NF-CP.

   • Auna ƙarfin lantarki a mahaɗin encoder:

     • Fil 1 (+) ↔ 2 (-):+ 12V ± 0.6V(haƙuri mai mahimmanci).

5. Ka'idar Sake haɗawa:

   • Kashe NF-CP.

   • Sake haɗa mahaɗin mai rikodin.

6. Kanfigareshan Siga:

   • Kunna NF-CP.

   • Saita P1 allon rotary potentiometers:

     • MON1 = 8,MON0 = 3.

7. Gwajin Kwaikwayo Hanyar:

   • Juya mai rikodin don yin kwaikwayon lifUPhanya.

   • TabbatarNunin 7SEG2 yana nuna "u"(duba Hoto na 4).

   • Idan "d" ya bayyana: Canja nau'i-nau'i-nau'i na encoder:

     • ENAP ↔ ENBPkumaENAN ↔ ENBN.

8. Ƙarshe:

   • Tsare amintaccen maɓalli masu hawa sukurori.

4 Binciken Matsayin LED

Koma zuwa Hoto 1 don shimfidar allo.

Binciken Mahimmanci:

1. Tabbatar da Naúrar Gyara:

   • Bayan an kunna wutar lantarki,CFO akan 7SEG dole ne ya haskaka.

   • Idan CFO ya kashe: Duba wutar lantarki da'ira da jerin lokaci.

2. Tabbatar da Matsayin WDT:

   • Tabbatar da hasken:

     • CWDTkumaMWDT(KCD-100X)

     • WDT(KCD-105X)

   • Idan WDT ya kashe:

     • Duba+ 5V wadatada haɗin kai mutunci.

3. Gwajin Cajin Wuta na Capacitor:

   • LED DCVakan allon capacitor (KCN-1000/KCN-1010) dole ne:

     • Haskaka lokacin da aka kunna.

     • Kashe~10 secondsbayan kashe wutar lantarki.

   • Halin CVD mara kyau: Bincike:

     • Naúrar inverter

     • Caji/fidda da'ira

     • Capacitor tashar wutar lantarki

Hoto 1 Matsayin LED akan allon P1